CX-4 10 Gigabit Ethernet Cables

CX-4 cables are assembled with premium Madison 8 pair, 100 ohm cable, and are available in lengths up to 15 meters. Standard connector type is the "pull" ejector style latch used for InfiniBand SFF-8470, but configurations with side squeeze latches or thumbscrews are also available.

CX-4 High Performance Cable Assemblies are part of the 10Gb Ethernet standard and they provide superior signal fidelity over long distances using the smallest, most flexible cable. The assemblies are engineered to be compliant with the IEEE Draft P802.3ak/D5.3 specification.

Cable assemblies for CX-4 are tested to a higher standard than are InfiniBand cables. Therefore, CX-4 cables are backwards compatible to InfiniBand, but InfiniBand cables do not necessarily meet CX-4 test standards.

  • CX-4 to CX-4 Pull Latch:

    CX-4 cable with 28 Gauge Madison 100 ohm cable w/(2) CX-4 pull latch connectors

    CX-4 connector picture

    CX4-P/5m: .5 Meter
    CX4-P/1m: 1 Meter
    CX4-P/2m: 2 Meter
    CX4-P/3m: 3 Meter
    CX4-P/5m: 5 Meter
    CX4-P/7m: 7 Meter
    CX4-P/10m: 10 Meter
    CX4-P/15m: 15 Meter

     

  • CX-4 to CX-4 Squeeze Latch:

    CX-4 cable with 28 Gauge Madison 100 ohm cable w/(2) CX-4 squeeze latch connectors

    CX-4 connector picture

    CX4-S/5m: .5 Meter
    CX4-S/1m: 1 Meter
    CX4-S/2m: 2 Meter
    CX4-S/3m: 3 Meter
    CX4-S/5m: 5 Meter
    CX4-S/7m: 7 Meter
    CX4-S/10m: 10 Meter
    CX4-S/15m: 15 Meter

     

  • QSFP to CX-4:

    CX-4 cable with 28 Gauge Madison 100 ohm cable w/(1) CX-4  & (1) QSFP connector

    Also available with InfiniBand QDR support!

    ? - Specify either pull(P) or squeeze(S) latch connector

    CX4-?-QSFP/5m: .5 Meter
    CX4-?-QSFP/1m: 1 Meter
    CX4-?-QSFP/2m: 2 Meter
    CX4-?-QSFP/3m: 3 Meter
    CX4-?-QSFP/5m: 5 Meter
    CX4-?-QSFP/7m: 7 Meter